REMOVAL DETAILS: 9/28 - 10/16. All items must be removed no later than 10/16. Your Buyer Invoice will include additional removal details as well as the contact information for the on-site removal supervisor. Riggers, movers, electricians, or buyers performing work at the Auction Sites must provide Auctioneer with evidence of insurance.

ONSITE SUPERVISOR:
Albert DeVine
248-622-3927
albertddevine@live.com

RIGGER FOR THE SALE: TBD

A 20% Buyer's Premium will apply.

PAYMENT TIMES: WITHIN 48 HOURS OF COMPLETION OF THE SALE.

ALL BIDS ARE MADE AND RECEIVED UNDER THE TERMS HEREINAFTER SET FORTH TO WHICH TERMS BIDDERS AGREE BY MAKING THEIR BID AT THE SALE. THESE TERMS CANNOT BE ALTERED EXCEPT BY THE AUCTIONEER. NO EMPLOYEE HAS AUTHORITY TO MODIFY SAME. THE OWNER AND/OR AUCTIONEER RESERVE THE RIGHT TO ADD TO OR MODIFY THE TERMS OF THE SALES.

This auction may require a credit or debit card 100% refundable deposit. Your credit/debit card added through the Bidspotter.com fully secure and PCI compliant registration process will be assessed a 100% refundable $1,000.00 (US Bidder) or $2,500.00 (International Bidder) deposit in order to be approved to bid online within this auction. If you are unsuccessful in the auction, your card will be refunded of your deposit within 24 hours post auction.

Holland Industrial Group LLC (“HIG” or “Auctioneer”) DOES NOT TAKE CASH, DEBIT CARDS OR CREDIT CARDS FOR AUCTION INVOICE PAYMENTS.

All payments must be made by Wire Transfer or Company Check with Bank Letter of Guarantee to HIG. Here is an example of what your letter should be: [Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment of Holland Industrial Group LLC on the account listed herein up to the amount of $. This letter is good until (insert expiration date 30 days from sale date)].

By registering, the Bidder hereby expressly authorizes HIG to charge the Credit Card if the Bidder fails to pay any invoice within forty-eight (48) hours after each such invoice is issued to Bidder.

All Bidders are required to give full name, address, phone, fax, and bank information when registering. All Bidders must register before bidding.

Bidders understand that they are required to comply with all applicable export control and sanctions laws and regulations (including, without limitation, the U.S. Export Administration Regulations, the U.S. International Traffic in Arms Regulations, and U.S. Office of Foreign Assets Control regulations) in connection with bidding for, shipping, and using goods in the sale, and that HIG is not providing, and its actions and communications do not provide, any approvals, authorizations, guidance or the like with respect to such laws. Bidders are required to complete a BIS-711 form in full upon request and to cooperate with all other requests for information by HIG to assess compliance with applicable laws and regulations, including information about a Bidder’s ownership. Each Bidders represents that neither it nor its owners (whether direct or indirect through another entity) and principals have not been designated as a Specially Designated National or other sanctioned party by the U.S. government.

All bids must be paid in full within two business days after the bids have closed. The Auctioneer shall determine the bidding increments. Some items may be auctioned with reserve.

All purchases must be removed within two weeks after the bids have closed. No lot can, on any account, be removed prior to HIG having been paid in full. Removal shall be at the expense, risk and liability of the Purchaser. Purchases will be delivered only on presentation of paid bill. Auctioneer shall not be responsible for goods not removed within the aforesaid time.

Riggers, movers, electricians, or buyer performing work at the Auction Sites must provide Auctioneer with evidence of insurance. The insurance coverage must be at a level acceptable to Auctioneer and to the Seller.

All checks for deposits and balances due shall be payable to the order of “Holland Industrial Group LLC” unless instructed otherwise. All bills must be paid to the Opa-locka headquarters offices of the Auctioneer at 13105 NW 42nd Ave Opa-locka FL 33054, or by wire transfer directly to the bank specified in the wire transfer instructions provided for this on-line auction. The full purchase price on all lots sold to the same buyer must be paid within the time fixed and before removal of any of the goods.

THE AUCTIONEER SHALL NOT BE RESPONSIBLE FOR THE CORRECT DESCRIPTION, GENUINENESS, AUTHENTICITY OF, OR DEFECT IN ANY LOT, AND MAKES NO WARRANTY IN CONNECTION THEREWITH. NO SALE SHALL BE SET ASIDE NOR ALLOWANCE MADE ON ACCOUNT OF ANY INCORRECTNESS, ERROR IN CATALOGING, OR ANY IMPERFECTION NOT NOTED. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES, ALL ARTICLES BEING EXPOSED FOR PUBLIC EXHIBITION, AND SOLD “AS IS” AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, AND NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED, OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES ARISING THEREFROM.

Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is Purchaser’s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation.

Purchaser agrees to indemnify and hold Auctioneer harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom.

No claims will be allowed after removal of goods from premises.

Auctioneer shall not, in any event, be liable for non-delivery or any other matter or thing, to any Purchaser of any lot, other than for the return to the Purchaser of the deposit or sum paid on said lot, should the Purchaser be entitled thereto.

In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting Purchaser.

Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefor. Neither the Auctioneer nor his principal shall be liable by reason of defect in or condition of the premises on which the sale is held.

The Auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of a Seller will be served, the Auctioneer reserves the right to sell all the property listed, in bulk.

Where items are sold by estimated weight, count or measure, the Purchaser will be billed for and required to pay for the estimated weight, count or measure. If, upon delivery, any shortage exists, the Purchaser will receive a refund at the rate of purchase. If there be an excess, the Purchaser will be required to pay for such excess, at the rate of purchase.

The Auctioneer reserves the right to reject any and all bids, alter the order of sale, and accept bids made on behalf of the Seller. Auctioneer is not responsible for internet lags, delays, blackouts, or disconnects.

The record of sale kept by the Auctioneer and bookkeeper will be taken as final in the event of any dispute.

The Auctioneer is acting as agent only and is not responsible for the acts of its principals. Purchaser acknowledges, as an inducement to Seller to commit Purchaser to bid, that Purchaser has independently inspected the goods bid upon by the Purchaser, and acknowledges to the Seller that Purchaser is acquiring all goods “AS IS, WITH ALL FAULTS” and “WITH REMOVAL AT PURCHASERS’ RISK AND EXPENSE” and agrees to protect, indemnify and hold harmless the Seller from any and all claims, demands, causes of actions, liabilities and judgments relating to the conditions or use of the goods.

Seller, if not the same as the Auctioneer, shall have the rights, protections and benefits afforded to the Auctioneer as set forth herein.

Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.

ANY ADDITIONAL PROVISIONS OR AMENDMENTS TO THE ABOVE LISTED TERMS WILL BE POSTED BY THE AUCTIONEER PRIOR TO THE START OF BIDDING.

Live Webcast Sale: Thursday Sept. 24th, 11am ET

Inspection: By Appointment Only

Checkout Dates: TBD

Location: 1210 E Madison Ave, Athens, TN 37303 

Sale In Conjunction With Maynards Industries 

The Available Assets Include A Substantial Collection Of Metal Stamping Presses, Automated Feed And Transfer Systems, Riveting And Bushing Equipment, Laser Processing Systems, Robotic Assembly Cells, Spring Winding Equipment, Welding Systems, Torque Stations, And Specialized Automotive Component Manufacturing Equipment. 

FEATURED ASSETS:

STAMPING PRESSES

• 2001 Fagor 1,100-Ton Press - Equipped With Dallas Feed Line, Wayne Trail Transfer Unit, And Dual Rolling Bolsters.
• 2001 Fagor 880-Ton Press - Equipped With Dallas Feed Line, Wayne Trail Transfer Unit, And Dual Rolling Bolsters.
• Bliss 800-Ton Press
• Verson 400-Ton Press - Equipped With Updated Dallas Feed Line.
• Verson 400-Ton Press
• Verson 300-Ton Press
• 2012 SEYI 660-Ton Press
• 2012 SEYI 440-Ton Press 

RIVETING, BUSHING & JOINING EQUIPMENT

• VW Bushing 1, Bushing 2, And Bushing 3 Stations
• Multiple VW416 Rivet Stations 1–8, Primarily Equipped With 2015 Orbitform Riveters
• Orbitform Riveting Stations With Integrated Vision Systems
• 5S Single Rivet Station - Parts
• 5S Dual Rivet Station - Equipped With Two Orbitform Riveters
• 5S Norton Bushing Station
• Single Point Riveter
• Multipoint Resistance Welder
• 2023 Projection Welding Station Equipped With Two Late-Model Orbitform Units
• 2019 Orbitform Rivet Station With Vision System 

LASER PROCESSING & ETCHING EQUIPMENT

• VW416 Laser 1
• VW416 Laser 2 - Equipped With An Upgraded Laser Scanner Head; Approximately $55,000 Upgrade.
• VW416 Laser 3 - Fixed Optic Laser Head With Fanuc M-20 Robot.
• U55X Laser Links Cell / Links Turntable - Fixed Optic Laser Head.
• Laser Barcode Etcher 

ROBOTIC ASSEMBLY & AUTOMATION

• VW 5S Assembly Line - Includes Four 2019 Fanuc M-20 Robots And One 2019 Fanuc R-2000iC Robot. Remaining Value Primarily Attributed To Components And Supporting Equipment.
• VW 7S Assembly Line - Similar Configuration To The VW 5S Assembly Line.
• JFA GMAW Cell - Includes Two Older Motoman Robots And Two SKS Power Supplies.
• Kia Headrest Assembly Station - Fanuc Arcmate 100ic Robot With Genesis Turntable And Lincoln Power Supply.
• Specialized Tube Bending Stations / Bender 3 - Appears To Be Dedicated Tube-Bending Equipment With Potential Value To A Specialized End User. 

SPRING WINDING & COMPONENT ASSEMBLY

• VW Spring Winder
• VW 5S Spring Winder
• Spring Winder Assembly
• Lever Assembly
• Motor Torque Station
• U55X Torque Station
• 40% VW Towel Bar Station
• 60% VW Towel Bar Station 

TESTING & INSPECTION

• VW 5S Function Tester
• 3rd Row Function Tester
• JFA Function Tester
• Additional Dedicated Function-Testing And Inspection Equipment Associated With The Assembly Lines 

ADDITIONAL MANUFACTURING EQUIPMENT

• 5S Assembly And Component Stations
• U55X Torque Station
• Motor Torque Station
• Specialized Tube Bending Equipment
• Single-Point And Multi-Point Riveting Equipment
• Resistance And Projection Welding Equipment
• Automated Laser Processing And Barcode Marking Systems
• Robotic Material Handling And Assembly Equipment